Consisting of a non-woven reinforced polyester mat which is coated and permeated with SBS modified bitumen to a thickness of approximately 3.5 mm (138 mils). Ceramic mineral granules cover the surface to provide superior protection against ultraviolet rays, while the underside is sanded to permit mopping to heat-sensitive substrates and to prevent sticking in the roll. This sheet can be applied as the protective cap for conventional BUR membrane, or a top ply in a two-ply Modiflex system.

This product is comprised of high-strength non-woven reinforced polyester which is coated and permeated with SBS modified bitumen to a nominal thickness of 4.0 mm (158 mils). The surface is covered with colored ceramic mineral granules to provide UV protection, while the underside is sanded to allow for mopping to heat-susceptible substrates and to prevent sticking in the roll. This sheet can be applied as the protective cap for conventional BUR membranes or modifed bitumen membranes.

A non-woven reinforced polyester reinforcing mat which is impregnated with SBS modified bitumen to a thickness of approximately 2.5 mm (98 mils). This sheet is protected on the top by a thin layer of poly-film (which disappears upon heat welding of the cap sheet), and on the bottom by sand, which allows for mopping to heat-sensitive substrates and prevents sticking in the roll. MP-180-FS base sheet may be used in SBS layered membrane construction. This product conforms to CGSB 37.56M and ASTM D.

A non-woven reinforced polyester reinforcing mat which is impregnated with SBS modified bitumen to a thickness of approximately 3.0 mm (118 mils). This sheet is protected on the top by a thin layer of poly-film (which disappears upon heat welding of the cap sheet), and on the bottom by sand, which allows for mopping to heat-sensitive substrates and prevents sticking in the roll. MP-180-FS base sheet may be used in SBS layered membrane construction. This product conforms to CGSB 37.56M and ASTM D.

Composed of a reinforcing mat of durable reinforced polyester which is impregnated and coated with Modiflex SBS modified bitumen to a thickness of approximately 2.5 mm (98 mils), This sheet is covered on both sides with sand to allow for mopping to heat-sensitive substrates and to prevent sticking in the roll. MP-180-SS is an enduring, non-slip base sheet which may be used in SBS layered membrane construction.

An inorganic reinforcing mat of high-strength non-woven glass fibres, impregnated and coated with SBS modified bitumen to a nominal thickness of 2.2 mm (87 mils). This sheet is sanded on the bottom and top to allow for mopping to heat-sensitive substrates and to prevent sticking in the roll.

An inorganic reinforcing mat of durable, high-strength non-woven glass fibres, which is heavily coated and impregnated with SBS modified bitumen to a nominal thickness of 2.2 mm (87 mils). This sheets surface is covered with a thin poly-film which disappears upon heat welding of the cap sheet, while the underside is sanded to allow for mopping to heat-susceptible substrates. This product will satisfy the requirements of CGSB-37.56-M and ASTM D6163.

An inorganic reinforcing mat of durable, high-strength non-woven glass fibres, which is heavily coated and impregnated with SBS modified bitumen to a nominal thickness of 2.2 mm (87 mils). This sheets surface is covered with a thin poly-film which disappears upon heat welding of the cap sheet, while the underside is sanded to allow for mopping to heat-susceptible substrates.